SKBEP-MIKO-10 Compact Micro Ohm Meter is a high-precision instrument used to measure very low resistances in electrical circuits. This device is crucial for detecting poor connections, ensuring quality control in manufacturing, and verifying the integrity of electrical systems. In case of obvious oxide film on the contacts more powerful micro-ohmmeters are recommended, such as MIKO-21 (test current up to 200 A) or MIKO-2.3 (test current up to 1000 A), as measurements using low currents in such instances can show higher values of resistance and, as a result, the contacts may be unjustifiably rejected.
3 modes of resistance measurement Different measurement modes are implemented in the instrument: AUTO: is intended for contact resistance measurement of HV circuit breakers w/o CT and any demountable or non-demountable connections with test current 10 A. The measurement starts automatically by the circuit closing; SINGLE: is intended for contact resistance measurement of HV circuit breakers w/o CT and any demountable or non-demountable connections with test current 1 A or 10 A. The measurement starts by the User command; BUILT-IN CT: is intended for contact resistance measurement of HV circuit breakers with CT with test current 10 A. The measurement starts by the User command
Thermal EMF balancing and other additional functions MIKO-10 is a modern compact micro-ohmmeter that meets the latest user requirements. The instrument has a number of important functions: Auto thermal EMF balancing in the test circuit; Auto power off, if the instrument is not used; Circuit continuity test; Auto measurement start against the test circuit continuity confirmation; Sound alarm at the start and at the end of the measurement.
Up to 1,000 measurements at maximum current One battery charge is enough for at least 1,000 measurements at maximum current. The instrument has an energy independent memory of up to 100 recordings that is sufficient for overall and complex test of the substation. USB connection to the PC facilitates classification and storage of the measurement results and generation of the reports. Special software developed by the manufacturer is used for data transfer from the instrument to the computer and for measurement results archiving.
Built-in battery, portability and reliability The built-in battery of MIKO-10 makes the operation process fully self-contained. One battery charge is enough for more than 1,000 measurements at maximum current. Energy independent memory up to 100 recordings ensures a complex test of a substation. MIKO-10 can justly be referred to portable instruments due to its light weight of 0.5 kg and small dimensions 165 ï 100 ï 60 mm. The above peculiarities ensure complete autonomy of the instrument over the vast territory of substation or facility.
Applications: Widely used in quality control, electrical maintenance, and equipment diagnostics.
Ohm Meter Features:
| Product Code | MIKO-10 |
| Minimum Order | 1 |
| Type | Micro Ohm Meter |
| Model Number | SKBEP-MIKO-10 |
| Display | Monolithic Graphic 128 X 64 Px |
| Driven Type | Electric |
| Mains Adaptor | 11-12 V DC/ 1 A |
| Meter Type | Micro |
| Measurement Time | 2 S W/o CT, 2-30 S With CT |
| Data Storage | Up To 1000 Measurements |
| Communication Interface | USB, Bluetooth |
| Resolution | 0.1 µΩ |
| Maximum Test Current | 10A |
| Calibration | Factory Calibrated, User Calibratable |
| Auto Shut-off | Yes, After 10 Minutes |
| Software Compatibility | Windows, MacOS |
| Measurement Modes | 2 Wire And 4-wire |
| Usage | Electrical Circuits, Equipment Diagnostics, Cable Testing |
| Condition | New |
| Exporter By | Myriad Industrial Solutions LLP |
| Country Of Origin | India |
Copyright © 2024 Myriad Industrial Solutions LLP All Rights Reserved.
